NASA Logo - Web Link to NASA.gov Vertical Line

+ Text Only Site
+ Non-Flash Version
+ Contact Glenn

Go
ABOUT NASA NEWS AND EVENTS MULTIMEDIA MISSIONS MyNASA WORK FOR NASA
Computer drawing of the Wright 1903 aircraft engine operation
 during the exhaust stroke

This is a computer drawing of one cylinder of the Wright brothers' 1903 aircraft engine. This engine powered the first, heavier than air, self-propelled, maneuverable, piloted aircraft; the Wright 1903 Flyer. The engine consisted of four cylinders like the one shown above, with each piston connected to a common crankshaft which turns the propellers to produce thrust.

The brothers' design is very simple by today's standards, so it is a good engine for students to study to learn the fundamentals of engine operation. This type of internal combustion engine is called a four-stroke engine because there are four movements (strokes) of the piston before the entire engine firing sequence is repeated. In the figure, we have colored the fuel/air intake system red, the electrical system green, and the exhaust system blue. We also represent the fuel/air mixture and the exhaust gases by small colored balls to show how these gases move through the engine. Since we will be referring to the movement of various engine parts, here is a figure showing the names of the parts:

Computer drawing of the Wright 1903 aircraft engine showing the
 labeled parts in a single cylinder.

Mechanical Operation

At the end of the heat rejection process, the piston is at the far left and exhaust gas has been cooled to nearly atmospheric conditions. The exhaust valve is then opened to begin the exhaust stroke. The purpose of the exhaust stroke is to clear the cylinder of the spent exhaust in preparation for another ignition cycle. The exhaust stroke begins at Stage 6 as the piston is pushed towards the combustion chamber (to the right in the figure). The intake valve is closed, the electrical contact is open, and the exhaust valve is opened by the cam pushing on the rocker arm. The exhaust gas is pushed past the valve and exits the engine. At the end of the exhaust stroke, Stage 1, the piston is located at the far right and is ready to begin another intake stroke after the exhaust valve is closed and the intake valve is opened.

Thermodynamics

The exhaust stroke takes place at a nearly constant atmospheric pressure because the exhaust valve is open to the atmosphere throughout the stroke. There is (theoretically) no work done on the exhaust during this process. The random motion of the gas causes to exit the combustion chamber and cylinder as the volume is decreased by the piston motion. The pressure and temperature ratios are both 1.0 during the exhaust stroke.



Activities:

Navigation..

Button to Display Wright Index

Re-Living the Wright Way
Beginner's Guide to Aeronautics
NASA Home Page
http://www.nasa.gov

 

    


+ Inspector General Hotline
+ Equal Employment Opportunity Data Posted Pursuant to the No Fear Act
+ Budgets, Strategic Plans and Accountability Reports
+ Freedom of Information Act
+ The President's Management Agenda
+ NASA Privacy Statement, Disclaimer,
and Accessibility Certification

 

NASA Logo   
Editor: Tom Benson
NASA Official: Tom Benson
Last Updated: Jun 12 2014

+ Contact Glenn