|
|
Titles:
J. M. Tate, J. K.
Bartlett, J. A. Robinson, C. C. Maender, L. Putcha, S. M. Smith, M. A.
Bowman,
S. A. Dulchavsky, A. E. Sargsyan, S. K. Miller, B. A. Banks, K. K.
deGroh and
D. Tsui, “Synergies between Space
Research and Space Operations - Examples from
the International Space Station” Presented at the 45th AIAA
Aerospace Sciences
Meeting and Exhibit, January 8-11, 2007, Reno, Nevada, AIAA Paper #
AIAA
2007-547 (January 2007). Waters, D. L., Banks, B. A., Thorson,
S.D.,
de Groh, K., and Miller, S. K., “Comparison
of the Atomic Oxygen Erosion Depth and Cone Height of Various Materials
at
Hyperthermal Energy”, Paper presented at the 10th International
Symposium
on Materials in a Space Environment & 8th International Conference
on
Protection of Materials and Structures in a Space Environment,
Collioure,
France, June 19 – 23, 2006
K. K. de Groh, B. A. Banks, C. E.
McCarthy,
R. N. Rucker, L. M. Roberts and L. A. Berger, “MISSE PEACE Polymers Atomic Oxygen Erosion
Results”
in the proceedings of the 2006 National Space & Missile Materials
Symposium
in conjunction with the 2006 MISSE Post-Retrieval Conference, Orlando,
Florida,
June 26 - 30, 2006; also NASA TM-2006-214482
Lillis, M. C., Youngstrom, E. E., Marx, L. M., Hammerstrom, A. M., Finefrock, K. D., Youngstrom, C. A., Kaminski, C., Fine, E. S., Hunt, P. K., de Groh, K. K., Banks, B. A., and Sechkar, E. A., “Space Flight Experiments to Measure Polymer Erosion and Contamination on Spacecraft,” NASA TM-2002-211553, June 2002.
Blackwood, J. R., Townsend, J. A., Hansen, P. A., McClendon, M. W., Dever, J. A., de Groh, K. K., Reed, B. B., He, C. C., and Peters, W. C., “Hubble Space Telescope Third Servicing Mission Retrieved Metallized Teflon FEP Analysis,” Proceedings of the SAMPE 2001 Conference, pp. 1797-1810, Long Beach, CA, May 6-10, 2001.
Dever, J. A., de Groh, K. K., Messer, R. K.,
McClendon, M. W., Viens, M., Wang, L. L., and Gummow, J. D., “Mechanical Properties of Teflon® FEP Retrieved
From the Hubble Space Telescope,” High Performance Polymers, vol
13, No 3, pp S373-S390, September 2001. Also appears in
Proceedings of the 46th International SAMPE Symposium and
Exhibition. Science of Advanced Materials and Process Engineering
Series, vol 46, Long Beach, California, May 6-10, 2001. Society
for the Advancement of Material and Process Engineering, pp 1811-1825,
2001-2002.
de Groh, K. K., Banks, B. A., Clark, G. W.,
Hammerstrom, A. M., Youngstrom, E. E., Kaminski, C., Fine, E. S. and
Marx, L. M., “A Sensitive Technique Using
Atomic Force Microscopy to Measure the Low Earth Orbit Atomic Oxygen
Erosion of Polymers,” presented at the Poly Millennial 2000
Conference, Kona, HI, December 9-13, 2000; also appears in: NASA
TM-2001-211346 (Dec. 2001).
Dever, J. A., de Groh, K. K., Banks, B. A., Townsend, J. A., Barth, J. L., Thomson, S., Gregory, T., and Savage, W., “Environmental Exposure Conditions for Teflon FEP on the Hubble Space Telescope,” High Performance Polymers, 12, No. 1, pp 125-139, March 2000. Also appears in Science of Advanced Materials and Process Engineering Series, vol 44, pp 999-1013 (1999).
Banks, B. A., de Groh, K. K., Baney-Barton, E.,Sechkar, E. A., Hunt, P. K., Willoughby, A., Bemer, M., Hope, S., Koo, J., Kaminski, C., and Youngstrom, E., "A Space Experiment to Measure the Atomic Oxygen Erosion of Polymers and Demonstrate a Technique to Identify Sources of Silicone Contamination", prepared for the 34th Intersociety Energy Conversion Engineering Conference (IECEC) sponsored by the Society of Automotive Engineers, Inc., Vancouver, British Columbia, Aug. 1-5, 1999.
Dever, J. A., de Groh, K. K., Banks, B. A., Townsends, J. A., Barth, J. L., Thomson, S., Gregory, and T., Savage, W., "Environmental Exposure Conditions for Teflon FEP on the Hubble Space Telescope", prepared for the 44th International SAMPE Symposium, May 23-27, 1999.
de Groh, K. K., Gaier, J. R., Hall, R. L., Norris, M. J., Espe, M. P., and Cato, D. R., "Effects of Heating on Teflon® FEP Thermal Control Material from the Hubble Space Telescope", prepared for the 44th International Symposium and Exhibition sponsored by the Society for the Advancement of Materials and Process Engineering, Long Beach, California, May 23-27, 1999.
de Groh, K. K., Banks, B. A., Sechkar, E. A., and Scheiman, D. A., "Simulated Solar Flare X-Ray and Thermal Cycling Durability Evaluation of Hubble Space Telescope Thermal Control Candidate Replacement Materials", prepared for the 4th International Space Conference on Protection of Materials and Structures from the LEO Space Environment sponsored by the University of Toronto and the Institute for Aerospace Studies, Toronto, Canada, May 23-24, 1999.
Townsend, J. A., Hansen, P. A., Dever, J. A., de Groh, K. K., Banks, B. A., Wang, L., and He, C., "Hubble Space Telescope Metallized Teflon® FEP Thermal Control Materials: On Orbit Degradation and Post-Retrieval Analysis", High Performance Polymers, 11, No. 1, pp.81-100, March, 1999.
Dever, J. A., de Groh, K. K., Townsend, J. A., and Wang, L. L., "Mechanical Properties Degradation of Teflon FEP Returned from the Hubble Space Telescope", AIAA Paper No. 98-0895, NASA TM-1998-206618, Jan. 1998.
Townsend, J. A., Hansen, P. A., Dever, J. A., and Triolo, J. J., "Analysis of Retrieved Hubble Space Telescope Thermal Control Materials", Science of Advanced Materials and Process Engineering Series, 43, pp. 582-93, 1998.
de Groh, K. K. and Smith, D. C., "Investigation of Teflon FEP Embrittlement on Spacecraft in Low Earth Orbit", prepared for the 7th International Symposium on Materials in a Space Environment cosponsored by ONERA, CERT, and ESA/ESTEC, Toulouse, France, June 16-20, 1997, NASA-TM-113153.
Banks, B. A. and Stueber, T. J., "Monte Carlo Computational Techniques for Prediction of Atomic Oxygen Erosion of Materials", presented at the NATO Advanced Research Workshop on Computer Modeling of Electronic and Atomic Processes in Solids, Wroclaw, Poland, May 20-23, 1996.
Gaier, James R., Davidson, Michelle L., Shively, Rhonda, “Durability of Intercalated Graphite Epoxy Composites in Low Earth Orbit”, NASA-TM-107157, February 1996 Banks, B. A., de Groh, K. K., Rutledge, S. K., and Difilippo, F. J., "Prediction of In-Space Durability of protected Polymers Based on Ground Laboratory Thermal Energy Atomic Oxygen", Protection of Materials and Structures in the Low Earth Orbit Space Environment, p. 89-100, proceedings of ICPMSE-3 Third International Space Conference, 1996, NASA-TM-107209.
Zuby, T. M., de Groh, K. K., and Smith, D. C., "Degradation of FEP Thermal Control Materials Returned from the Hubble Space Telescope", NASA-TM-104627, 1995.
Banks, B. A., de Groh, K. K., Auer, B. M., Gebauer, L., and LaMouraux, C., "Atomic Oxygen Interaction at Defect Sites in Protective Coatings on Polymers Flown on LDEF", LDEF Materials Results for Spacecraft Applications, NASA CP-3257, 1994, p.143-158.
Banks, B. A., de Groh, K. K., Bucholz, J. L., and Cales, M. R., "Atomic Oxygen Interactions with Protected Organic Materials on the Long Duration Exposure Facility (LDEF)", LDEF-69 Months in Space, Third Post-Retrieval Symposium, NASA CP-3275, Part 2, 1993, p.737-753.
|
|