Return to articleA view of cell 22 looking into the test cell at the two test stands. Both stands are about 46 inches high. The original stand is on the left, and there is a typical small engine injector mounted on it, about 5 inches in diameter. The new stand to the right has an engine assembly with a square chamber and nozzle mounted on it. This engine generates high-temperature exhaust for composite material structure exposure tests. Many cooling water supply lines to the engine chamber can be seen. Behind the two stands is a common bulkhead, which separates the stands from the control valves. Large bundles of instrumentation cables run from the overhead down to the test stands along the face of the bulkhead.
Last updated: June 25, 2003
Responsible NASA Official:
Gynelle.C.Steele@nasa.gov
216-433-8258
Point of contact for NASA Glenn's Research & Technology reports:
Cynthia.L.Dreibelbis@nasa.gov
216-433-2912
SGT, Inc.
Web page curator:
Nancy.L.Obryan@nasa.gov
216-433-5793
Wyle Information Systems, LLC