Return to articleSchematic of geometry showing flat lower surface and inlet cross-section (dimensions are in centimeters). The passage is characterized by two inlet sections whose channels are separated by an interrupted rib. After a 180-degree turn, the flow passes through a single return channel. The entire model decreases in height from the hub to the tip and also from the exit channel side to the inlet side. There are turbulators located on the upper and lower surfaces oriented at 45 degrees to the flow direction.
Last updated: June 25, 2003
Responsible NASA Official:
Gynelle.C.Steele@nasa.gov
216-433-8258
Point of contact for NASA Glenn's Research & Technology reports:
Cynthia.L.Dreibelbis@nasa.gov
216-433-2912
SGT, Inc.
Web page curator:
Nancy.L.Obryan@nasa.gov
216-433-5793
Wyle Information Systems, LLC