NASA Logo, National Aeronautics and Space Administration

Research & Technology | NASA Glenn Research Center

Publications

Dr. Anthony J. Strazisar

  1. Wernet, M. P., VanZante, D., Strazisar, A. J., John, W.T., Prahst, P. S., “Characterization of the tip Clearance Flow in an Axial Compressor using 3-D Digital PIV,” Experiments in Fluids, Vol. 39, No.4, October, 2005.
  2. Roberts, W. B., Prahst, P. S., Thorp, S., Strazisar, A. J., “The Effect of Ultrapolish on a Transonic Axial Rotor,” ASME GT2005-69132, proceedings of the ASME Turbo Expo 2005, June 6-9, 2005, Reno, Nevada.
  3. Strazisar, A. J., Bright, M. B., Thorp, S., Culley, D.E., Suder, K. L.,”Compressor Stall Control Through Endwall Recirculation,”, ASME GT2004-54295, proceedings of the ASME Turbo Expo 2004, June 14-17, 2005, Vienna, Austria.
  4. Culley, D. E., Bright, M. B., Prahst, S.P., and Strazisar, A. J., “Active Flow Separation Control of a Stator Vane using Embedded Injection in a Multistage Compressor Experiment,” ASME  Journal of Turbomachinery, Vol. 126, pp. 24-34, January, 2004.
  5. Van Zante, Dale E., Adamczyk, J. J., strazisar, A. J., and Okiishi, T.H., “Wake recovery Performance Benefit in a High-Speed Axial Compressor,” ASME Journal of Turbomachinery, Vol. 124, pp. 275-284, July, 2002.
  6. Roberts, W. B., Armin, A., Kassaseya, G., Suder, K. L., Thorp, S. A., and Strazisar, A. J., “The Effect of Variable Chord Length on Transonic Axial Rotor Performance,” ASME Journal of Turbomachinery, Vol. 124, pp. 351-356, July, 2002.
  7. Wernet, M.P., VanZante, D.E. Strazisar, A. J., John, W.T., and Prahst, P.S., “3-D Digital PIV Measurements of the Tip Clearance Flow in an Axial Compressor,” ASME Paper No. GT-2002-30643, June, 2002.
  8. Wernet, M. P., John, W.T., Prahst, S. P., and Strazisar, A. J., “Characterization of the Tip Clearance Flow in an Axial Compressor using Digital PIV,” AIAA-2001-00697, January, 2001.
  9. Suder, K. L., Hathaway, M. D., Thorp, S.A., Strazisar, A. J., and Bright, M. M., “Compressor Stability Enhancement Using Discrete Tip Injection,” ASME Journal of Turbomachinery, Vol. 123, No. 1, pp. 14-23, January, 2001.
  10. Van Zante, D. E., Strazisar, A. J., Wood, J. R., Hathaway, M. D., and Okiishi, T.H., “Recommendations for Achieving Accurate Numerical Simulation of Tip Clearance Flows in Transonic Compressor Rotors,” ASME Journal of Turbomachinery, Vol. 122, No. 4, pp. 733-743, October, 2000.
  11. Shabbir, A., Celestina, M. L., Adamczyk, J. J., and Strazisar, A. J., “The Effect of Hub Leakage Flow on Two High Speed Axial Flow Compressor Rotors,” ASME Paper No. 97-GT-346, 1997. (to be published in the ASME  Journal of Turbomachinery)
  12. Weigl, H. J., Paduano, J.D., Frechette, L.G., Epstein, A. H., Greitzer, E. M., Bright, M. M., and Strazisar, A. J., “Active Stabilization of Rotating Stall and Surge in a Transonic Single Stage Axial Compressor,” ASME Journal of Turbomachinery, Vol. 120, No. 4, pp. 625-636.
  13. Skoch, G. J., Prahst, P. S., Wernet, M. P., Wood, J. R., and Strazisar, A. J., “Laser Anemometer Measurements of the Flow Field in a 4:1 Pressure Ratio Centrifugal Impeller,” ASME Paper No. 97-GT-342, June 1997.
  14. Van Zante, D. E., Adamczyk, J. J., Strazisar, A. J., and Okiishi, T. H., “Wake Recovery Performance Benefit in a High-Speed Axial Compressor,” ASME Paper No. 97-GT-535, June, 1997.
  15. Suder, K. L., Chima, R. V., Strazisar, A. J., and Roberts, W.B., “The Effect of Adding Roughness and Thickness to a Transonic Axial Compressor Rotor,” ASME Journal of Turbomachinery, Vol 117, pp 491–505, 1995.
  16. Van Zante, D. E., Okiishi, T. H., Suder, K. L., and Strazisar, A .J., “An Improved Aspirating Probe for Total Temperature and Total Pressure Measurements in Compressor Flows,” ASME Paper No. 94-GT-222.
  17. Strazisar, A. J., “The Changing Roles of Experimental and Computational Fluid Mechanics,” in Proceedings, 3rd World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Honolulu, 1993.
  18. Strazisar, A. J., “Laser Anemometer Applications in Turbomachinery,” in Proceedings, International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows, Prague, 1993
  19. Hathaway, M.D., Chriss, R. M., Wood, J.R., and Strazisar, A. J., “Experimental and Computational Investigation of the NASA Low-Speed Centrifugal Compressor Flow Field,”   ASME Journal of Turbomachinery, Vol 115, pp 527–542, 1993.
  20. Szuch, J. R., Arpasi, D. J., and Strazisar, A. J., “Enhancing Aeropropulsion Research with High-Speed Interactive Computing, “presented at the 10th International Symposium on Air-Breathing Engines, 1991.
  21. Wood, J. R., Strazisar, A. J., and Hathaway, M. D., “Single Stage Transonic Fan Rotor,” in Test Cases for Computation of Internal Flows in Aero Engine Components, AGARD Advisory Report 275, 1990.
  22. Strazisar, A. J., Wood, J. R., Hathaway, M. D., and Suder, K. L., “Laser Anemometer Measurements in a Transonic Axial-Flow Fan Rotor,” NASA TP-2879, June, 1989.
  23. Chriss, R.M., Keith, T.G., Hingst, W.R., and Strazisar, A.J., “An LDA Investigation of Three-Dimensional Normal Shock-Boundary Layer Interactions in a Corner,” AIAA Paper 87-1369, 1987.
  24. Simonyi, P. S., and Strazisar, A. J., “The Application of 32-bit Minicomputers to Laser Anemometer Research in Turbomachinery,” presented at International Specialists Meeting on the Use of Computers in Laser Velocimetry, May 1987.
  25. Suder, K. L., Hathaway, M. D., Okiishi, T. H., Strazisar, A. J., and Adamczyk, J. J., “Measurements of the Unsteady Flow Field Within the Stator Row of a Transonic Axial-Flow Fan, Part I: Measurement and Analysis Techniques,” ASME Paper 87-GT-226, 1987.
  26. Hathaway, M. D., Suder, K. L., Okiishi, T. H., Strazisar, A. J., and Adamczyk, J .J., “Measurements of the Unsteady Flow Field Within the Stator Row of a Transonic Axial-Flow Fan, Part II: Results and Discussion,” ASME Paper 87-GT-226, 1987.
  27. Wood, J. R., Strazisar, A. J., and Simonyi, P. S., “Shock Structure Measured in a Transonic Fan Using Laser Anemometry,” in AGARD CP-401, March, 1987.
  28. Strazisar, A. J., “Laser Fringe Anemometry for Aero Engine Components,” in AGARD CP-399, November, 1986
  29. Hathaway, M.D., Gertz, J., Epstein, A.H., and Strazisar, A. J., “Rotor Wake Characteristics of a Transonic Axial Flow Fan,” AIAA Journal, Vol. 24, No. 11, pp1802–1810, 1986.
  30. Strazisar, A. J., “Application of Laser Anemometry to Turbomachinery Flowfield Measurements,” Von Karman Institute Lecture Series No. 3, 1985
  31. Strazisar, A. J., “Investigation of Flow Phenomena in a Transonic Fan Using Laser Anemometry,” ASME Journal of Engineering for Power, Vol. 107, No. 2, pp. 427-436, 1985
  32. Chima, R.V., and Strazisar, A.J., “Comparison of Two- and Three-Dimensional Flow Computations with Laser Anemometer Measurements in a Transonic Compressor Rotor,”  ASME Journal of Engineering for Power, Vol. 105, No. 3, pp. 596-605, 1983.
  33. Powell, J. A., Strazisar, A. J., and Seasholtz, R. G., “Efficient Laser Anemometer for Intra-Rotor Flow Mapping in Turbomachinery,”  ASME Journal of Engineering for Power, Vol. 103, No. 2, pp. 424-430, 1981.
  34. Strazisar, A. J., and Powell, J. A., “Laser Anemometer Measurements in a Transonic Axial Flow Compressor Rotor,” ASME Journal of Engineering for Power, Vol. 103, No. 2, pp. 430-437, 1981.
  35. Strazisar, A. J., and Chima, R.V., “Comparison Between Optical Measurements and a Numerical Solution of the Flow Field within a Transonic Axial-Flow Compressor Rotor,” AIAA Paper 80-1078, 1980.
  36. Strazisar, A.J., and Reshotko, E., “Stability of Heated Laminar Boundary Layers in Water with Non-uniform Surface Temperatures,”  Physics of Fluids, Vol. 21, pp. 727-735, 1978.
  37. Strazisar, A. J., Reshotko, E., “Stability of Heated Laminar Boundary Layers in Water,”  in AGARD CP-224, "Laminar-Turbulent Transition,” 1977. 
  38. Strazisar, A. J., Reshotko, E., and Prahl, J.M., “Experimental Study of the Stability of Heated Laminar Boundary Layers in Water,”  Journal of Fluid Mechanics, Vol. 83, pp. 225-247, 1977.
NASA Logo - nasa.gov